Metal Fabrication
Over 40 years experience
Neumann Fabrication has been operating its workshop at Currumbin on the Gold Coast for over 40 years.
Over that time we have built up a solid reputation for high-quality welding and for fabrications in steel, stainless steel and aluminium.
Your fabrication project will benefit from engaging a reliable contractor who believes in direct and open communication with clients and delivering professional and friendly service.
Specialists in Complex Fabrications
We specialise in high-quality complex metal fabrications and installations. We offer our services and experience to:
- Civil Construction Industry,
- Mining Industry,
- Oil & Gas Industry,
- Commercial Construction Industry,
- Concrete Industry,
- Quarrying Industry, and
- Dredging Industry.
Registered TMR Metal Fabricator
Department of Transport and Main Roads Registered Fabricated Steelwork Supplier (Level 2) - Major and Minor Infrastructure to MRTS78 (includes Aluminium & Stainless Steel)
Steel fabricated truss bridges, rolled steel girders, and overhead fabricated steel gantries, steel bridge and traffic and balustrade rails, steel and aluminium bridge throw screens, steel road side mounted sign gantries, replacement components, bridge restraint angles, bearing attachment plates, traffic sign slip base poles, fabricated noise barrier posts, noise barriers on parapets, galvanised steel cover plates, steel grates, and other miscellaneous steel structures.
Highly Experienced & Qualified Team
Our management, technical team, and qualified, experienced welders have been with the company for many years. This continuity and vast experience enable us to consistently deliver quality steel fabrication projects on time and on budget. In addition, proven quality management systems and the ability of our business to adapt and innovate are key strengths and points of difference.
Your project will benefit from engaging a reliable contractor who believes in direct and open communication with clients and delivering professional and friendly service. At Neumann Fabrication, we continue to strive to exceed the clients’ expectations.
Workshop Based on the Gold Coast
We have a large, well-appointed workshop with the latest welding equipment strategically located at Currumbin on the Gold Coast.
We have direct access to the Pacific Motorway and easy access to the Port of Brisbane, enabling us to service our diversified local, national and international client base.
Featured Metal Fabrication Projects
Manufacture of Variable Message Sign Steel Structure
The manufacture of a Type C Variable Message Sign Structure for J1 LED, which will be placed on the Pacific Highway at Springwood. Supply, fabrication and galvanising of a steel structure to suit type C variable message sign, consisting of gantry column, gantry sign frame, a platform with handrail, including swinging gate, ladder with fall protection, adjusting rod assemblies, and 6mm HD bolt plate rings. All welding is in accordance with AS/NZ 1554.1.
Byron Bay Bus Interchange Canopy Steelwork
Neumann Fabrication was awarded the supply, manufacture and erection of the structural steelwork for Bus Canopy #1, #2 and the Amenities Block. Bus Canopy #1 also included the supply of perforated aluminium screen panels that portray the image of the old steam train that used to service Byron Bay. All welding is in accordance with AS/NZ 1554.1. The steelwork consisted of approximately 80 tonnes of complex heavy steel box columns and rafters.
V1 Veloway Bridge Gantry – Fabricated Steelworks
Steel construction works included: the supply, manufacture and heavy transport of the steel bridge gantry, including aluminium powder-coated steel screen frames, handrails, balustrades and bridge bearings. All welding is in accordance with AS/NZ 1554.1. Overall, there was approx—170 T of fabricated steelwork. The gantry was divided into three fabricated steel sections at 45m in length per section. All steelwork was completed on time and on budget.
South East Freeway Cycleway Project Steelwork
Scope of works includes: galvanised steel anti-throw screen and balustrade steelwork, including steel bike railings and bridge mounted light brackets. Overall, the project consisted of 188T of galvanised and powder coated steelwork representing 8,264 individual pieces. All welding is in accordance with AS/NZ 1554.1. The installed steelwork's quality and presentation indicate what the Neumann Fabrication team strives to achieve.
100% Australian Owned
Over 40 years Experience in Metal Fabrication.
Innovative
We have built a reputation for completing complex and difficult metal construction projects using our engineering skills, vast experience, innovative ideas and cost-effective solutions to overcome the difficult challenges.
Safe
We are committed to a safe and healthy working environment for all employees and all associated others and the continuous improvement of occupational health and safety in our steel fabrication and onsite installation activities.
Quality
Our Quality Management System is certified to AS/NZS ISO 9001:2015. This system is tailored to each project we undertake to ensure we deliver quality outcomes and always meet our client’s standards and project specifications.
Environment
We are committed to reducing our environmental impact through our policies and practices. For example, our environmental management policy encourages employees to identify and manage environmental risks.
