V1 Veloway Bikeway Update
Our steel fabrication team is making significant progress in assembling the first ten steel fabricated sections to complete Truss 1, covering the first 45 metres of the 135-metre long Veloway Bikeway Bridge Structure.
The works involve fabricating a 135-metre long bridge structure over Juliette Street and a section of bikeway from Cornwall Street to O’Keefe Street for the V1 Veloway Bikeway Project.
The bridge structure will be entirely fabricated in three 45 metre pieces in our Currumbin yard for delivery to Juliette Street, Greenslopes.
The V1, once completed, will run from Brisbane City to the Gateway Motorway off-ramp at Eight Mile Plains. The 17km connection will successfully provide the missing links within the existing cycleway network and ensure cyclists’ safe and dedicated commute. The Veloway will also help promote an active and healthy lifestyle.
TMR Registered Steel Fabricator
Neumann Fabrication – Steel Fabrication is a registered Level 3* Steel Fabricator for the Queensland – Department of Transport and Main Roads in the following areas:
- Truss bridges,
- Rolled steel girders,
- Overhead fabricated gantries,
- Traffic and balustrade rail,
- Bridge throw screens,
- Road side-mounted sign gantries,
- Bridge restraint angles,
- Bearing attachment plates,
- Traffic sign slip base poles,
- Fabricated noise barrier posts,
- Galvanised steel cover plates,
- Gates,
- and other miscellaneous steel fabrication
Note Level 3 is the highest level of qualification – * Level 3 – A supplier who has consistently supplied products according to the TMR specification for two years.